Causes and Solutions of Rubber Sticky Rollers Factory Suppliers Manufacturers Quotes

Causes and Solutions of Rubber Sticky Rollers

What about the roller of the mill?


Causes and solutions of rubber sticky rollers.

1. The temperature of the mixer is too low.

2. When cleaning the mixer, wipe the roller with toluene.

3. The adhesive used is too strong.


Resolvent:

1. In the first case and the third case, if the roller temperature of the mill is refined with high hardness material, the temperature can be fixed at about 40 degrees.

2. If the second situation mentioned above occurs, the solution will be troublesome. You must clean the material bit by bit, then clean the rollers with white oil, then rub the rollers with anti-rust oil, and clean them up.


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Rubber Sheet Asbestos Rubber Sheet Gland Packing PTFE Products Asbestos Sealing Product